DIAMOND FISHING PRODUCTS INTRODUCES OUR COLLLECTION OF
DFP CUSTOM WIND-ON LEADERS

dyneema

Diamond’s high strength monofilament and fluorocarbon combined with a low stretch dyneema loop creates the strongest, most dependable wind-on leader in the world. Diamond’s Wind-On leaders are attached with a loop to loop connection to your fishing line. The wind-on system improves bait presentation, eliminates the need for conventional long leaders and provides safer handling and releasing of fish at the boat.

LEAD_IMG_2657    MonoWO    LEAD_IMG_2663
 

 

DIAMOND FISHING PRODUCTS FLUOROCARBON WIND-ON LEADERS

Lb Test Diameter Color Length
80 0.85mm Clear White 25ft
90 1.05mm Clear White 25ft
130 1.11mm Clear White 25ft
150 1.23mm Clear White 25ft
180 1.35mm Clear White 25ft
200 1.56mm Clear White 25ft
220 1.75mm Clear White 25ft
280 1.91mm Clear White 25ft
330 2.01mm Clear White 25ft
400 2.36mm Clear White 25ft

 

DIAMOND FISHING PRODUCTS MONOFILAMENT WIND-ON LEADERS

Lb Test Diameter Color Length
80 0.84mm Smoke Blue 25ft
100 0.91mm Smoke Blue 25ft
130 1.17mm Smoke Blue 25ft
150 1.28mm Smoke Blue 25ft
200 1.48mm Smoke Blue 25ft
250 1.66mm Smoke Blue 25ft
300 1.81mm Smoke Blue 25ft
400 2.03mm Smoke Blue 25ft
500 2.34mm Smoke Blue 25ft

 

DIAMOND FISHING PRODUCTS X-TRA HARD WIND-ON LEADERS

Lb Test Diameter Color Length
80 0.84mm Clear White 25ft
100 0.91mm Clear White 25ft
130 1.17mm Clear White 25ft
150 1.28mm Clear White 25ft
200 1.48mm Clear White 25ft
250 1.66mm Clear White 25ft
300 1.81mm Clear White 25ft
400 2.03mm Clear White 25ft
500 2.34mm Clear White 25ft

 

DIAMOND FISHING PRODUCTS SWORDFISH WIND-ON LEADERS

Lb Test Diameter Color Length
250 1.66mm Clear White 150ft
300 1.81mm Smoke Blue 150ft

 How to join a Wind-On or a Top Shot to your main line

using a Cat’s-Paw Knot

CatsPaw

The Cat’s-Paw knot is simply a loop-to-loop connection between the doubled mainline and the braided loop on your top shot, your wind-on leader or both This knot provides a 100 per cent strong connection and has no tag ends so it travels smoothly through your rod’s guides and tip. First, make a small loop using either a short Bimini Twist or if you’re using hollow core Dacron or Spectra, splice a loop at the end of your mainline. Pass the mainline loop through the tag end of the top shot or wind-on loop. Then pass the front end of the leader or top shot back through mainline loop. Align both loops and pass the leader or wind-on through the center two or three more times. Slowly tighten pulling from both directions making sure to adjust the mainline loop and wind-on loop to keep everything straight during the tensioning process.